In order to improve production efficiency, some details will be ignored, such as the problem of material deviation and skid during the operation of the Kaiping machine. How to solve this problem? Let's find out why: Feeder and leveler are not on the same plane, need to re-install the equipment.

 1.The two sides of the roller press imbalance, need to remove the light side of the chain, the heavy side of the rise, or remove the heavy side of the chain, press the light side.

 2.The positive center of the rectifying wheel does not coincide with the positive center of the original unwinding direction. Because of the clamping force of the rectifying wheel, the steel plate can not be deviated, but when the thin plate is leveled, because

 3.The clamping force of steel has exceeded the yield strength of steel plate, which leads to the slight deformation of the edge of steel plate, so there will be deviation phenomenon, and the thinner the plate, the more obvious the phenomenon is.

 4.The deviation can be corrected by adjusting the position of the coil on the uncoiler when the problem is found in the open sheet.。If you don't find the material in time, it will cause quality problems, so pay more attention to some detail problems