MR4117 of parameters of saw roller press

 Roller diameter (mm)70

 Rotation speed (rpm)52

 Roller saw blade speed (m/s)0.183

 Roll saw blade thickness (mm)1.5

 Roll saw blade width (mm)160

 Cylinder diameter (mm)65

 Rolling pressure (MPA)6

 Motor Power (Watt)750

 Motor speed (rpm)1380

 Machine tool appearance 740×440×580

 Weight of machine tool (kg)180

 The machine shall be placed on a special wooden frame, which shall be divided into two layers, with a rectangular wooden platform in the middle, with the roller press fixed in the middle position, an iron 1.1-meter platform placed on the left side of the roller press, the plane of the platform being 1 mm lower than the outer edge of the lower roller, and wooden sticks placed on the upper layer of the wooden frame. When the saw blade is pressed, the saw blade shall slide lightly on the stick without damaging teeth. The size of the frame and the installation height of the roller press shall be determined by the user himself